Instruction manual

IP 700 Series Phone Administrator Guide Appendix A. Configuration and Line Parameters
6AOSAG0001-31A Copyright © 2011 ADTRAN, Inc. 73
RingerLevels ASCII
String
Set the audio levels of the ringer using a
comma separated list of the following
settings. The following default values (in
decimal) are listed next to the name for
clarity:
RxGain1 205
RxGain2 290
RxGain3 410
RxGain4 579
RxGain5 817
RxGain6 1154
RxGain7 1631
RxGain8 2303
RxGain9 3254
RxGain10 4596
Caution: Do not change these values from
their defaults unless instructed by
ADTRAN Technical Support. Doing so
could break TIA-810 compliance.
Config File
RtpBase ASCII
String
Sets the base port from which the phone
transmits and receives media. The valid
range should be an even number from
3000 to 65408.
Given an RTP base, the phone should use
the next 64 consecutive even numbers for
RTP ports. If within that range an existing
(reserved) odd or even User Datagram
Protocol (UDP) port number is used, the
phone should skip over an even/odd pair
to the next even number. For example, if
the user set rtpBase to 5550, 5552, 5556,
5558, etc. would be used. In this example,
5554 is skipped because 5555 is a
reserved port used by the phonectl
server.
If an odd number is specified, the next
lowest even number, if it fits the above
limitations, is used.
Default: 3000
Config File
Web Interface
Table 12. Configuration Parameters (Continued)
Parameter Value Type Description Sources