Instruction manual

IP 700 Series Phone Administrator Guide Appendix A. Configuration and Line Parameters
6AOSAG0001-31A Copyright © 2011 ADTRAN, Inc. 71
PreselectAnswer True or
False
Allows the user to answer an incoming call
by pressing the line key on a ringing line. If
the phone is idle, pressing the line key will
activate the speakerphone.
True = Select and answer/retrieve bridge
False = Select only
Default: True
Config File
Web Interface
PreselectOriginate True or
False
Originates a call when an idle line key is
pressed. If the phone is idle, the
speakerphone is activated.
True = Select and originate
False = Select only
Default: True
Config File
Web Interface
PostselectAutoHold True or
False
Enables or disables placing deselected
calls on hold automatically if another line is
selected. Otherwise, the deselected call
will be dropped.
True = Hold current call
False = Disconnect current call
Default: True
Config File
Web Interface
ProxyServer.z.Address.y FQDN or IP
Address
An IP address, FQDN, or domain name for
one or more proxy servers. If only a proxy
domain name is specified, a SIP SRV
record for the proxy must be configured in
the DNS server and the
ProxyServer.z.Port.y must be set to 0.
Nonregistration-related SIP call signaling
is sent to this address.
Y = the server number. May be 1 or 2.
Z may have a value between 0 and 11.
Config File
Web Interface
ProxyServer.z.Port.y 0 to 65535 Port of the Registration Server.
Y may be 1 or 2. 1 is the primary and 2 is
the backup. If set to 0, then the value
returned in the DNS_SRV lookup is used.
A setting of zero also causes a DNS
NAPTR lookup of the value in
ProxyServer.z.Address.y.
Z may have a value between 0 and 11.
Default: 5060
Config File
Web Interface
ProxyServerMaxRetry 1 to 3 Number of attempts to contact a server
before the next one is tried.
Default: 3
Config File
Web Interface
Table 12. Configuration Parameters (Continued)
Parameter Value Type Description Sources