Instruction manual

IP 700 Series Phone Administrator Guide Appendix A. Configuration and Line Parameters
6AOSAG0001-31A Copyright © 2011 ADTRAN, Inc. 67
HttpsLogin Up to 16
ASCII
Characters
Specifies the login that is used to access
the HTTPS server.
Default: admin
DHCP
Web Interface
Phone Interface
adtran_info.txt
HttpsPassword Up to 16
ASCII
Characters
Specifies the password used to access the
HTTPS server.
Default: password
DHCP
Web Interface
Phone Interface
adtran_info.txt
HttpsServers FQDN or IP
Address
Specifies up to two HTTPS servers, in
comma separated format. If a server is
unavailable, the phone goes through the
list until a working server is found. Either
FtpServers, HttpServers, HttpsServers,
or TftpServers may be specified as the
non-null value used to determine the
download method for configuration files.
DHCP
Phone Interface
Web Interface
IcmpArpTimeout ASCII
String
Specifies the number of seconds before
routing table entries created by ICMP
redirects are timed out of the routing table.
If 0, then they never time out.
Default: 0
Config File
Web Interface
IconPixmap Up to 32
ASCII
Characters
Specifies the path and file name to the
server that contains the icon pixmap. This
file is downloaded from the FTP/TFTP
server upon boot. Format is .bmp, 16
color.
Default: iconpixmap.bmp
Config File
IdleGroupPreference 0 to 11 Specifies which line will be preselected
when idle, and then used for call
origination when the phone goes off-hook.
The IdleSelectOrder parameter further
defines the policy for selecting a specific
physical line key should more than one be
assigned to that line.
Config File
Web Interface
IntercomGroupPreference 0 to 11 Specifies which line (should be of GI type)
represents the intercom lines on the
phone. For key system mode, set this to
the GI configured line. It appears on the
phone as Intercoms.
Config File
Web Interface
Table 12. Configuration Parameters (Continued)
Parameter Value Type Description Sources