Instruction manual

Appendix A. Configuration and Line Parameters ADTRAN IP 700 Series Phone Administrator Guide
66 Copyright © 2011 ADTRAN, Inc. 6AOSAG0001-31A
HfaaiBeep True or
False
Enables (true) or disables (false) HFAAI
notification. If enabled, a
600 ms tone is played before an HFAAI
call is presented on the phone.
Default: True
Config File
Web Interface
HfaaiEnable True or
False
Enables (true) or disables (false) HFAAI
calls on the phone.
Default: True
Config File
Web Interface
Phone Interface
HoldReminder 0 to 300 Indicates the number of seconds before
the hold reminder tone is played. If set to
0, the hold reminder is disabled.
Default: 0
Config File
Web Interface
HoldSignal 2543 or
3264
Specifies the type of hold to be used.
Incoming signaling can be of either type.
Default: 3264
Config File
Web Interface
HttpLogin Up to 16
ASCII
Characters
Specifies the login that is used to access
the HTTP server.
Default: admin
DHCP
Web Interface
Phone Interface
adtran_info.txt
HttpPassword Up to 16
ASCII
Characters
Specifies the password used to access the
HTTP server.
Default: password
DHCP
Web Interface
Phone Interface
adtran_info.txt
HttpServerEnable True or
False
Enables (true) or disables (false) the
internal HTTP server.
Default: True
Config File
Web Interface
HttpServerPort 0 to 65536 Specifies the port on which the HTTP
server receives TCP traffic.
Default: 80
Config File
Web Interface
HttpServers FQDN or IP
Address
Specifies up to two HTTP servers, in
comma separated format. If a server is
unavailable, the phone goes through the
list until a working server is found. Either
FtpServers, HttpServers, HttpsServers,
or TftpServers may be specified as the
non-null value used to determine the
download method for configuration files.
DHCP
Phone Interface
Web Interface
Table 12. Configuration Parameters (Continued)
Parameter Value Type Description Sources