Instruction manual

IP 700 Series Phone Administrator Guide Configuring Common Features
6AOSAG0001-31A Copyright © 2011 ADTRAN, Inc. 45
Configuring Other Server and SIP Options
A number of server settings can be specified for the IP phone to function correctly on your network. These
parameters are listed below with a brief description of their function. This list also includes SIP options
that can be specified as well. These parameters are covered in greater detail in Appendix A on page 57.
Table 6. Server Parameters and SIP Options Overview
Parameter Description
FeatureUri Specifies the server (in URI format) to which feature-related state
changes are sent.
FeatureExpires Defines the subscription interval for FeatureUri notifications.
FtpServers Specifies the location of firmware files that the IP phone will download.
FtpServers and TftpServers may not both be specified as the non-null
value used to determine the download method for configuration files.
TftpServers Specifies the location of firmware files that the IP phone will download.
FtpServers and TftpServers may not both be specified as the non-null
value used to determine the download method for configuration files.
AppName
BootName
Specifies application and boot image file names to be downloaded to the
phone.
HoldSignal Specifies the hold type for the phone to use.
MwiLine Specifies the line on which external MWI server subscribes originate.
MwiExpires Specifies the expiration interval of the MWI server subscribes.
MwiSubscribeUri Specifies the Request URI sent to the external MWI server.
MwiPrimary Specifies the primary voice mailbox association. Setting this to 12 will
associate the mailbox to the external messaging server.
MwiSecondary Specifies the secondary mailbox association. Setting this to 12 will
associate the mailbox to the external messaging server.
MwiCadence Selects the operating mode of the illuminated Messages function key.
MessagesCallback Defines the URI that is called when the Message function key is pressed.
ParkZoneUri Specifies the Request URI that is used for outgoing invites to the park
zone server.
SipKeepAlive Enables or disables SIP session timers.
SntpServers Specifies one or more time servers where the phone can retrieve time
and date information.
SpreHfaii Specifies the dialing prefix used to initiate HFAAI calls.
SprePageOverhead Specifies the dial access code used to access the overhead paging
system. If this value is null, then overhead page is not presented on the
soft key as an option.
StunServer Specifies the FQDN or IP address of the STUN server, which may be
required for operating phones behind network address translation (NAT)
routers.