Instruction manual

Configuring Common Features ADTRAN IP 700 Series Phone Administrator Guide

#True since we will assign this line to more than 1 line button (MCA).

Reg.0.Multiple true

#General PBX type line.

Reg.0.Realm gp

#Link it to the previous Servers we defined where it will Register.

Reg.0.Servers 1

#Not a shared line.

Reg.0.Shared false

#Request-URI for calls forwarded to voicemail.

Reg.0.Voicemail *98

Setting the Realm

The realm specifies the type of phone system in which the lines are being configured. This setting provides

the dial plan to be used. Table 4 below lists the available settings for Reg.1.Realm defined in the MAC

address-based configuration file for each phone. Refer to Appendix B on page 81 for more information on

setting up the dial plan parameters.

Setting the Domain

Setting the domain in the Reg.x.Domain parameter is optional. It is used to form Invite URIs and

registration Request URIs that have a domain after the @ symbol instead of an IP address or FQDN from

the proxy or registrar server.

Assigning Line Key Functions

The line keys are numbered from 1 to 6 on the IP 706 phone and from 1 to 12 on the IP 712 phone. The

Table 4. Realm Settings

Value Description

General External (GE) Used for general non-PBX-type outside lines. Lines of

this type use the DialPlanExternal dial plan.

Private External (PE) Used for private (few users) non-PBX-type outside lines.

Lines of this type use the DialPlanExternal dial plan.

General PBX (GP) Used for PBX call appearances that require an additional

digit, such as 9 to be dialed to access outside numbers.

Lines of this type use the DialPlanPbx dial plan.

General Intercom (GI) Used for intercom lines configured for key system

operation. Lines of this type use the DialPlanIntercom

dial plan.