Instruction manual

Using the Administrator’s Web Interface ADTRAN IP 700 Series Phone Administrator Guide

Speed Dial Settings

From the Speed Settings menu, you can configure speed dial buttons. Speed members are dynamically

placed on line keys not occupied by Line or DND line keys in ascending order of Option Number. Speed

members can also be configured by the user using the Set Speed menu on the phone interface.

Select the option number first, then configure the label, number, and realm.

Figure 13. Speed Settings Menu

To remove the configured values (shown in parentheses after the setting name), select Clear Manual

Settings.

To change the current configured values, follow these steps:

1. Enter a new value in the corresponding field.

2. Select Save Manual Settings.

Both BLF and Speed members are dynamically assigned to line keys. BLF members have a

higher priority when filling link keys not occupied by Line or DND buttons. Any line keys

remaining after all members from the subscribed BLF groups have been placed are

assigned to Speed members.