Instruction manual

Using the Administrator’s Web Interface ADTRAN IP 700 Series Phone Administrator Guide

Network Settings

From the Network Settings menu, you can change the IP address, gateway, and subnet mask. This menu

also allows you to enable and set DHCP, duplex negotiation speeds, server type, virtual local area network

(VLAN) IDs, HTTP server, and Internet Control Message Protocol

Address Resolution Protocol (ICMP

ARP) timeout.

Figure 7. Network Settings Menu

To remove the configured values (shown in parentheses after the setting name), select Clear Manual

Settings.

To change the current configured values, follow these steps:

1. Enter a new value in the corresponding field.

2. Select Save Manual Settings.