Unit installation

61223026L2-5A Issue 1, November 2003 9
The HDSL2 Unit Information Screen (Figure 6),
provides detailed product information on each
component in the HDSL2 circuit. This screen also
displays contact information for ADTRAN Technical
Support, Internet site and address.
The Provisioning Screen (Figure 7) displays the current
provisioning settings for the HDSL2 circuit. To change
a particular option setting, select the appropriate
number and a new menu will appear with a list of the
available settings.
Figure 6. HDSL2 Unit information Screen
Figure 7. Provisioning Screen
Circuit ID: 10/29/03 09:29:45
Press ESC to return to previous menu
ADTRAN
901 Explorer Boulevard
Huntsville, Alabama 35806-2807
--------------------- For Information or Technical Support ---------------------
Support Hours ( Normal 7am - 7pm CST, Emergency 7 days x 24 hours )
Phone: [phone] / 888.873.HDSL Fax: [phone] Internet: www.adtran.com
--------------------------------------------------------------------------------
ADTN H2TU-C ADTN H2TU-R
P/N: 1223001L2 P/N: 1223026L2
S/N: 123456789 S/N: 123456789
CLEI: T1L7JBMAAA CLEI: T1L7MERAAA
Manf: 10/01/2003 Manf: 10/01/2003
Ver: A04 Ver: A01
Circuit ID: 10/29/03 09:29:45
Press ESC to return to previous menu
Provisioning
1. DSX-1 Line Buildout = EXTERNAL
2. DSX-1/DS1 Line Code = B8ZS
3. DSX-1/DS1 Framing = ESF
4. Forced Frame Conversion = Disabled
5. Smartjack Loopback = Enabled
6. Loopback Timeout = 120 Min
7. Latching Loopback Mode = T1 (Disabled)
8. DS1 TX Level = 0 dB
9. Customer Loss Indicator = AIS / CI
10. PRM Setting = AUTO
11. Loop Atten Alarm Thres = 30dB
12. SNR Margin Alarm Thres = 04dB
13. Remote Provisioning = Enabled
D. Restore Factory Defaults
Selection: