Unit installation

8 Issue 1, November 2003 61223026L2-5A
6. CONTROL PORT OPERATION-HDSL2
The screens illustrated in Figure 5 through Figure 26
apply to an HDSL2 circuit deployed with the ADTRAN
HDSL2 technology. The circuit includes an H2TU-C
and an H2TU-R. Other configurations are possible (for
example, other vendor’s equipment) and their displays
will vary slightly from those shown in this section.
First displayed is the ADTRAN HDSL2 Main Menu
(Figure 5), from which the various OAM&P
(Operation, Administrative, Maintenance, and Provi-
sioning) screens may be accessed. To display a
particular screen from the menu, press the number key
associated with the screen title and then press the
ENTER
key.
Figure 5. HDSL2 Main Menu
Circuit ID: 10/29/03 09:29:45
Adtran HDSL2 Main Menu
1. HDSL2 Unit Information
2. Provisioning
3. Span Status
4. Loopbacks and Test
5. Performance History
6. Scratch Pad, Ckt ID, Time/Date
7. Terminal Modes
8. Alarm History
9. Event History
10. System PM/Screen Report
11. Clear PM and Alarm Histories
12. Troubleshooting
13. Virtual Terminal Control
If subscreens do not work properly,
press CTRL-T to move to manual update mode.
Selection: