Instruction manual

Appendix A. AT Commands and S-Registers
61200239L1-20 Express 3010/3110 User Manual A-3
Changing a String S-Register
Type
ATSS
,
followed by the number of the S-register to be changed,
followed by an equal sign, followed by the numeric value to be as-
signed to the register, and press
Enter
.
ATSS80=5551212
Dialing a Call using the AT Command Processor
To dial a call using the DTE terminal and AT commands, type
AT D
,
AT -
DT
,
or
ATDP
and the telephone number on one line; then press
Enter
.
ATD5551212
To end an active call with the AT command processor, press the break
in key sequence
+++
or the redefined key; then type
ATH
and press
Enter
to hang up the line.
Command Function
A Answer. Places the Express in answer mode.
AT!S Displays Status Buffer.
AT!S1 Displays Link Status
AT!V Configuration Menu
D Dial. Precedes the telephone access number
[ATD5551212].
DS Dial a stored number [DS3].
H Hang up. Disconnects the current call.
I0 Identify unit. Commands the unit to display model
number.
I1 Identify software. Commands the unit to display
software version.
O On-line. Commands the unit to go back on line