Instruction manual

Chapter 3. Application Configuration
61200239L1-20 Express 3010/3110 User Manual 3-15
Default (factory)
This option restores the Express to the following factory default setup:
The Express can be reset to the factory default settings by setting
switch 2 to the off (up) position. See the section
Verify Switch Settings
on page 3-1 for more information.
Factory default erases all stored phone numbers, SPIDs, and LDNs.
Service type ISDN dial line
Automatic answering Enabled
ISDN call type Data 64k
Call screening Answer Any
Data protocol Clear Channel
DTE mode Synchronous
DTR option Ignore DTR
DTE flow control None