Instruction manual

Chapter 3. Application Configuration
3-14 Express 3010/3110 User Manual 61200239L1-20
CONFIGURING THE EXPRESS USING PRO-
FILES (QUICK SETUP)
To configure the DTE Options quickly and easily, use the
Profiles
menu to automatically set up the most common DTE configurations.
Press the number corresponding to
Profiles
and press
Enter
to display
the
Profiles
options:
For fine-tuning a particular application and DTE settings, see the sec-
tion
Options for both Leased and Switched ISDN Service
on page 3-8
.
This
section provides detailed step-by-step processes for configuring the
DTE Options.
Most Internet service providers supporting ISDN also support PPP
protocol. If connecting to an Internet service provider using one B-
channel, select
Internet 64K
, which sets the protocol to PPP. If ar-
rangements have been made with the Internet service provider to use
two B-channels, select
Internet 128K
, which uses multilink PPP proto-
col.
Loading a factory profile has no effect on any SPID(s), ISDN Phone
Number(s), or Switch Type settings already configured. The settings
that are altered when applying a profile are shown on the following
pages.
Default Dial V120 asyn
Dial 56k Sync Dial Bond asyn
Dial 64k Sync Internet 64k
Dial 112k Sync Internet 128k
Dial 128k Sync Remote 64k
Leased 128k (Express 3010 only) Remote 128k
Ldm 128 Master (Express 3010
only)
Leased V.120 (Express
3010 only)