Instruction manual

Chapter 3. Application Configuration
3-4 Express 3010/3110 User Manual 61200239L1-20
Auto Answer
Press the number corresponding to
Auto Answer
and press
Enter
to
view the
Auto Answer
options:
Disabled, Enabled,
and
Dump All
Calls
. Press the number corresponding to the desired options; then
press
Enter
.
Disabled
When
Disabled
is selected, the Express will not answer the call. An
AT answer command (ATA) must be issued to the Express before it
accepts the incoming call. The ringing call can be dumped using the
Hang up line
command.
Enabled
When
Enabled
is selected, the Express will accept an incoming data
call on the primary phone number (SPID1, LDN1). If that call is a
BONDING call, then another incoming call is accepted on the second-
ary phone number (SPID2, LDN2).
Dump all calls
When
Dump all calls
is selected, the Express will not accept any in-
coming calls, keeping the line clear for outgoing calls.
Call Screening
Call Screening
allows the Express to answer all incoming calls (
1) An-
swer Any
) (default) or only calls originating from phone numbers
stored in the
DIAL
menu as stored numbers SN0 through SN9 (
2) An-
wer if SN0 .. 9
).
When
Call Screening
is set to answer any numbers stored in SN0
through SN9, an incoming call is not answered if the Call ID received
from the switch does not match a stored number. Depending on the
switch type, the Call ID may be presented in either a seven- or ten-dig-
it format. The Express displays the Call ID for all dumped calls in the
Status buffer.