Instruction manual

Chapter 3. Application Configuration
3-2 Express 3010/3110 User Manual 61200239L1-20
ISDN Phone Number (Local Directory Number)
This option allows the entry of 0, 1, or 2 LDNs. The LDN is used when
placing or receiving calls. The LDN is the local phone number as-
signed to the line.
LDN 1 = 5 5 5 1 2 1 2
LDN 2 = 5 5 5 1 2 1 2
Auto-Detect SPIDs/Switch (Express 3010 only)
This can be set to
Active
or
Disabled
. If set to
Active,
the SPID and
switch type for your ISDN switch are automatically detected. If set to
Disabled
, no automatic detection takes place.
Switch Protocol
Find out what kind of ISDN switch your local CO is using by asking
your telephone administrator or your telephone company representa-
tive. The Express can be configured for a Northern Telecom DMS-100,
LUCENT 5ESS
®
CO switch, a switch conforming to the National
ISDN-1 standard (usually an LUCENT 5ESS, NTI DMS-100™, or Sie-
mens EWSD), or an NEC Switch.
Press the number corresponding to
Switch Protocol
and press
Enter
to display the
Switch Protocol
options:
LUCENT 5ESS
,
DMS-100
,
National ISDN1
,
NEC
(Express 3110), and
EuroISDN
(Express 3110).
Press the number corresponding to the desired option and press
Enter
again.
Call Type
The Call type can be configured four different ways, depending on
the type of service used. Press the number corresponding to
Call Type
and press
Enter
to display the Call Type options:
Speech, Audio, Data
56k,
and
Data 64k
. Press the number corresponding to the desired op-
tion, and then press
Enter
.