Instruction manual

Chapter 2. Installation

61200239L1-20 Express 3010/3110 User Manual 2-3

WINDOWS INSTALLATION INSTRUCTIONS

Hardware Installation

1. With the computer’s power off, connect the

EIA232

serial port on

the Express to an available COM port on the computer.

2. Plug the Express’s AC power cord into the port labeled

PWR

Plug the other end into a 120 V electrical outlet. The Express is

now powered on.

3. Plug the RJ-45 connector (large end) of the RJ-45 to RJ-11 tele-

phone cable into the jack labeled

ISDN

on the rear of the Express.

4. Plug the RJ-11 connector (small end) of the RJ-45 to RJ-11 tele-

phone cable into the ISDN telephone wall jack.

5. Power on the computer.

Windows 95/98 Users

1. Windows 95/98 automatically detects and installs the necessary

driver for the Express. Follow the on screen instructions.

Windows NT 4.0 Users

1. Double click on the

My Computer

icon, then on the

Control

Panel

icon.

2. Double click on the

Modems

icon.

3. If there is no other modem installed on the computer, the

Install

New Modem

window appears. If another modem is already

installed on the computer, click the

Add

button to display the

Install New Modem

window.

4. Click the

button and Windows NT will attempt to automat-

ically detect the Express.

5. To complete the installation, follow the on screen instructions.