Specifications

61203153L3-20 Express 3000 SP User Manual 4-1
Chapter 4
Using VT-100 Terminal
Emulation
You can configure the Express 3000 SP using any communications
package that supports VT-100 terminal emulation. Ensure that the Ex-
press 3000 SP is properly connected to your PC and that it is powered
on before you try to configure your unit.
Configuring the Express 3000 SP Using VT-100 Terminal Emulation
Step Action
1
Connect to a VT-100 terminal using a communications
package such as HyperTerminal.
2
At the prompt, enter the command
AT!V
and press the
Enter
key.
(The Configuration screen displays; see
Figure 4-1.)
The AT command is not visible as you type since echo is
off by default. To enable echo, type
ATE1
.
3
Enter the following information:
• MSN number 1
• MSN number 2
4
Enter
Ctrl + X
to exit the menu.