Specifications

Chapter 3. Using the Express Configuration Program
61203153L3-20 Express 3000 SP User Manual 3-25
der
preferences
) to instruct the program to detect the connection
without your assistance.
Automatically Detecting the Unit on Startup
To instruct the ADTRAN Express Configuration program to automat-
ically detect on startup an Express 3000 SP unit on COM ports 1
through 4, check the
Auto-Detect Express 3000 SP
checkbox (under
preferences
). This feature defaults to the auto-detect state. Uncheck
the box to disable auto-detection.
ADTRAN recommends that you use this feature to automatically de-
tect SPIDs and Switch Types, thus greatly reducing the occurrence of
time-consuming problems.
Using Caller ID
Caller ID allows you to view the number of an incoming Voice or Au-
dio call via a pop-up menu on your computer screen. To enable Caller
ID, check the
Caller ID and capture COM port
checkbox (under
prefer-
ences
).
If you want Caller ID information to display on the screen when you
are not using a terminal application or dial-up networking, check
Cap-
ture COM Port
on the Tray Tool menu (see also
Capture COM Port
on
page 3-4).
You can also view information in the Caller ID log buffer (see
Display-
ing the Express 3000 SP’s Caller ID Log Buffer
on page 3-22).
Using Terminal Software for Diagnostics
You can specify a software program to use for diagnostic test purpos-
es. Under
preferences > Terminal Software
, enter the
Program Name
and
Program Parameters
. With this information entered, when you
click
Terminal
(under
diagnostics
), the program designated in these
fields launches.