Specifications

Chapter 3. Using the Express Configuration Program
3-8 Express 3000 SP User Manual 61203153L3-20
General Tab
The General Tab contains fields for setting ISDN line information such
as switch type, area code, phone numbers 1 and 2, and SPIDs 1 and 2.
In addition, you can disable the automatic detection of SPIDs. Also,
you can enter feature activator codes for conference calling, call trans-
fer, and message waiting.
Switch Type
Defines the switch type for the local version of the software, either
AT&T 5ESS, DMS - 100, National ISDN-1, or NEC Switch. If you
are running the International version of the Express Configura-
tion Wizard, five additional switch types are available: Euro IS-
DN, VN4, NTT, KDD, or TDX. (The telephone company should
provide this information as part of the ISDN Line installation; if
this information is not provided, contact the telephone company.)
MSN Numbers 1and 2
Defines the ISDN MSNs. The MSN is the telephone number as-
signed to the ISDN line and is used when placing or receiving
calls.
Sub-Addressing
Enables or disables sub-addressing.
POTS 1 and POTS 2 Sub-Address: Identifies sub-address number
assigned to the different POTS port when sub-addressing is en-
abled.
Life Line Phone
Identifies which POTS interface is left enabled to place or receive
calls during span power mode.
Preview Tab
The Preview tab window displays a list of the configuration parame-
ters and their values for the current profile.
ATS
refers to the AT com-
mands for that configuration parameter,
Description
refers to the
particular configuration parameter, and
Value
lists the corresponding
parameter value.