Specifications

Chapter 4: Networks
4-18
1. Set up the managed physical interface as described in “Configuring a DHCP Relay
Agent” on page 4-9 and in “Configuring the BSC DHCP Server” on page 4-11.
2. Select Managed-side VLAN from the Create drop-down list on the Network page.
The Create a Managed VLAN page appears as shown in Figure 4-11.
3. The Enable checkbox is marked by default to make the managed-side VLAN
available for use.
4. Enter the managed VLAN settings, as described below:
• Name - A unique name for the managed-side VLAN.
• VLAN ID - The VLAN identification number. The specified ID must be unique on
the managed side of the network and in the range of 2 to 4094. The managed-
side VLAN ID you create here might match a protected-side VLAN ID to create a
pass-through VLAN as described in Appendix A, "An Overview of Virtual LANs."
Figure 4-11: Create a Managed VLAN Page