Specifications
BlueSecure Controller Models
BlueSecureâ„¢ Controller Setup and Administration Guide 1-9
option is available to support direct connection of PoE access points like the BlueSecure
1500 Access Point via the front-panel ports.
Bluesocket BSC Model Specifications
All products in the Bluesocket BSC family share the same HTML-based administrator
console and software functions, and vary only in the number of users supported, data
throughput, form factor, and network ports. The following table summarizes the
Bluesocket BSC model specifications.
Figure 1-7: Bluesocket BSC-600
Table 1-1: Bluesocket BSC Model Specifications
Specification BSC-600 BSC-1200 BSC-2100
BSC-2200/
3200/5200
Physical
dimensions
1U enclosure
Width: 380 mm
(15 in)
Depth: 290 mm (11.5
in)
Height: 44.5 mm
(1.75 in)
1U enclosure
Width: 380mm
(15 in)
Depth: 290 mm (11.5
in)
Height: 44.5 mm
(1.75 in)
2U enclosure
Width: 445 mm
(17.5 in)
Depth: 450mm (17.7
in)
Height: 89 mm (3.5
in)
2U enclosure
Width: 445 mm
(17.5 in)
Depth: 450mm
(17.7 in)
Height: 89 mm (3.5
in)
Environmental
Operating
Temperature:
10 to 35
degrees C
(50 to 95 degrees F)
Humidity:
40 to 80%,
non-condensing
Operating
Temperature:
10 to 35
degrees C
(50 to 95 degrees F)
Humidity:
40 to 80%,
non-condensing
Operating
Temperature:
10 to 35
degrees C
(50 to 95 degrees F)
Humidity:
40 to 80%,
non-condensing
Operating
Temperature:
10 to 35
degrees C
(50 to 95 degrees F)
Humidity:
40 to 80%,
non-condensing
Power 220 Watt, dual-
sensing, 110/240 V,
50/60 Hz power
supply
220 Watt, dual-
sensing, 110/240 V,
50/60 Hz power
supply
200 Watt, dual-
sensing, 110/240 V,
50/60 Hz power
supply
350 Watt, dual-
sensing, 110/240 V,
50/60 Hz power
supply
Network
interfaces
Managed Interface
:
Four 10/100/1000
Mbps/802.3af
copper Ethernet front-
panel interfaces
Protected Interface
:
One 10/100/1000
Mbps copper Ethernet
interface.
Failover/Admin:
One 10/100 Mbps
copper Ethernet
interface
Managed Interface
:
Four 10/100/1000
Mbps/802.3af
copper Ethernet front-
panel interfaces
Protected Interface
:
One 10/100/1000
Mbps copper Ethernet
interface.
Failover/Admin:
One 10/100 Mbps
copper Ethernet
interface
Managed & Protected
:
Standard - 10/100/
1000 Mbps copper
Ethernet interfaces
Optional - Either
interface (or both) can
be 1000BaseSX fiber
with SC-type
connector
Failover:
10/100 Mbps copper
Ethernet interface
4 GbE Interfaces
(Managed Interface,
Protected Interface
and two for link agg.)
Standard - 10/100/
1000 Mbps copper
Ethernet interfaces
Optional - Can be
1000BaseSX fiber
with SC-type
connector
Failover:
10/100/1000 Mbps
copper Ethernet
Admin:
10/100/1000 Mbps
copper Ethernet