Specifications

Automatic Backup of the BSC Database
BlueSecure™ Controller Setup and Administration Guide 10-9
SNMP Agent Start the selected version of SNMP agent (v2c, v3, or both) on the BSC, or shut down the
agent. To enable administrator access to SNMP v3, which requires a user ID and
password, see “Adding a New Administrator Account” on page 3-4 of this guide.
Default value: Off (SNMP agent shut down).
Read-Only
Community
String
Enter and confirm the SNMP v2c community string that enables a remote device to
retrieve read-only SNMP information from the BSC.
Read-Write
Community
String
Enter and confirm the SNMP v2c community string that enables a remote device to read
SNMP information from and modify SNMP settings on the BSC.
System Location
and System
Contact
Optional comment fields for the physical location and contact information for the BSC.
SNMP Trap
Management
SNMP Management station IP address - To enable SNMP traps, enter the IP address of
the SNMP management station(s) (i.e., trap host(s)), one per row.
Community string - To enable SNMP traps, enter the community string for each SNMP
management station.
Row Management - To clear row data, delete a row, or insert or append blank rows to
the end of the SNMP Trap management table, select the appropriate command from the
Row Management drop-down list. To remove an SNMP management station from the
database, clear all of the data from the appropriate row before storing the information.
Saving the
settings
Click Save to save the SNMP agent settings to the BSC database.
You may be prompted to restart the BSC. We recommend that you do not restart the BSC
until you have completely finished configuring the BSC for use in your network.
Automatic Backup of the BSC Database
To configure the BSC to automatically backup its configuration files to a specified
computer via FTP or SCP:
Figure 10-4: SNMP Settings Page