Specifications

Transparent NTLM Authentication
BlueSecure™ Controller Setup and Administration Guide 6-15
Displaying the
New
Transparent
NTLM Windows
server page
1. Click the User authentication tab in the BSC administrator console.
2. Select Transparent NTLM Windows Authentication from the Create drop-down list on
the User authentication page. The New Transparent NTLM Windows server page
appears as shown in Figure 6-5.
Enable server The Enable checkbox is marked by default to make the server available for user
authentication.
Name Enter a meaningful name for the Transparent NTLM Windows authentication server.
Transparent
NTLM Windows
server settings
1. Domain Name (Optional): Enter the Windows NT domain in which the Windows
client has membership.
2. Domain Controllers: Enter the IP address of each NT domain controller.
3. MSRPC Ports: Enter the server ports that are opened to domain controllers for remote
procedure call (RPC) traffic. Use a hyphen to designate a port range and use a
comma between each port or port range entry.
For example, to specify ports 1024 through 2000 and also port 2003, enter 1024-
2000,2003. Leaving this field blank automatically designates ports 1024 through
65535 as the MSRPC ports.
Figure 6-5: New Transparent NTLM Windows Server Page