User manual

Appendix A. Dial Plan Interface Configuration
40 ATLAS 800 Series Video Module User Manual 61200773L1-1A
D
EFAULT
D
IAL
C
ALL
A
S
Write Security: 3; Read Security: 5
Specifies the call type used to populate the Bearer Capability Information Element
in the ISDN Call Setup Message if not specified in the Smart Dial string. Options
include: D
IGITAL
(Data), V
OICE
(Speech), or A
UDIO
(3.1kHz audio).
D
EFAULT
S
OURCE
ID
Write Security: 3; Read Security: 5
Defines the source ID assigned to this call to be used for internal ATLAS routing
when not otherwise specified in the Smart Dial string. Refer to Src ID discussion
on page 39 for more details.
D
EFAULT
M
IN
DS0
S
Write Security: 3; Read Security: 5
This option will specify the minimum number of DS0s necessary for this switched
call if not otherwise specified in the Smart Dial string. If the call is negotiated and
the minimum DS0s value is not met, the call will be disconnected. Any value other
than 1 requires a BONDING resource to inverse multiplex the multiple switched
channels together.
D
EFAULT
M
AX
DS0
S
Write Security: 3; Read Security: 5
This option will specify the maximum number of DS0s allowed for this switched
call if not otherwise specified in the Smart Dial string. If the call is negotiated and
the maximum DS0s value is not acceptable to the answering equipment, the call
will be disconnected. Any value other than 1 requires a BONDING resource to
inverse multiplex the multiple switched channels together.
M
IN
I
NCOMING
DS0
S
Write Security: 3; Read Security: 5
This option will specify the minimum number of DS0s necessary for an incoming
switched call to this endpoint. If the call is negotiated and the minimum DS0s value
is not met, the call will be disconnected. Any value other than 1 requires a
BONDING resource to inverse multiplex the multiple switched channels together.
M
AX
I
NCOMING
DS0
S
Write Security: 3; Read Security: 5
This option will specify the maximum number of DS0s allowed for an incoming
switched call to this endpoint. If the call is negotiated and the maximum DS0s
value is not acceptable to the answering equipment, the call will be disconnected.
Any value other than 1 requires a BONDING resource to inverse multiplex the
multiple switched channels together.