User manual

Chapter 3. Operation
61200773L1-1A ATLAS 800 Series Video Module User Manual 35
V.35
Configures the interface for V.35 use.
RS-449
Configures the interface for RS-449 use.
L
OOPBACK
Configures the interface to emulate a connected loopback cable.
CURRENT DTE TYPE
Displays the current configuration of the Video Module DTE Interface.
MODULE ALARMS
Provides a shortcut to the A
LARM
menu (see See “Alarm Status” on page 30.).
TEST ACTIVITY
Provides a shortcut to the T
EST
menu (see See “Test” on page 33.)
ATLAS FEATURES USED WITH VIDEO MODULE OPTIONS
Two additional ATLAS 800 Series menu items can operate in conjunction with the
Video Module: F
ACTORY
R
ESTORE
and R
UN
S
ELFTEST
.
F
ACTORY
R
ESTORE
You can restore the factory default settings for an Video Module by pressing
F
ei-
ther while the cursor is over the S
LT
number (this action restores the factory settings
for all of the module options) or while the cursor is over an individual field (this ac-
tion restores factory settings only for the particular field).
R
UN
S
ELFTEST
R
UN
S
ELFTEST
, a submenu of the ATLAS 800 Series main menu item T
EST
, exe-
cutes both the Video Module internal test and the ATLAS 800 Series internal test.
For additional information on R
UN
S
ELFTEST
, see the ATLAS 800 Series User Man-
ual.
When R
UN
S
ELFTEST
displays, place the cursor on it and press
Enter
to execute
the test. The unit continuously changes the display on the self-test log screen until
all test results are shown.