User manual

Chapter 2. Installation
22 ATLAS 800 Series Video Module User Manual 61200773L1-1A
INSTALLING THE VIDEO MODULE
Figure represents the actions required to properly install the
Video Module, as described in the Step/Action table below.
Figure 2-1. Installing the Video Module
Instructions for Installing the Video Module
Step Action
1
Remove the cover plate from the appropriate option slot in the
ATLAS 800 Series chassis rear panel.
2
Slide the Video Module into the option slot until the module is
firmly positioned against the front of the chassis.
3 Secure the thumbscrews at both edges of the module.
4 Connect the cables to the associated device(s).
5
Complete installation of remaining modules and Base Unit as
specified in the Installation chapter of the ATLAS 800 Series
User Manual.
To ensure that the thumbscrews are securely fastened, use a
screwdriver to tighten them.