User manual

Appendix A. Dial Plan Interface Configuration
A-2 ATLAS Quad USSI Module User Manual 61200261L1-1
» Number of Ports
Defines to ATLAS how many of the ports could be used to answer calls to
the number(s) defined in the
Accept Call
list. You can enter numbers 1
through 4. The ports are contiguous beginning with the port number
selected and the number of ports.
Example
If the port selected (as a part of Slot/Port selection) is 2, and the number of
ports selected here was 2, then ports 2 and 3 would be enabled to receive
calls to the numbers listed under the
Incoming Call Accept
list.