User manual

Chapter 3. Operation
3-4 ATLAS Quad USSI Module User Manual 61200261L1-1
>
MENU
Displays additional status and configuration menus for the selected module.
(To access the menus options for this item, use the arrow keys to scroll to the
Menu
column for the module you want to edit, and press
Enter
.) For detailed
information on each menu option, see ATLAS Quad USSI Module Menu Op-
tions on page 3-5.
>
ALARMS
Read security: 5
Displays whether there is an alarm condition on the ATLAS Quad USSI
Module. Press
Enter
in this field to activate the Alarm menu.
>
TEST
Read security: 5
Displays whether the ATLAS Quad USSI Module is executing a test. Press
Enter
in this field to activate the
Test
menu.
>
STATE
Write security: 3; Read security: 5
Allows an installed module to be marked
Offline
, which may be useful in
system troubleshooting. Although a module is physically installed, it must
be marked
Online
for it to be considered an available resource.
>
STATUS
Read security: 5
This is a read-only field presenting status information on the ATLAS Quad
USSI Module. The following messages may display:
>
REV
Read security: 5
(Hardware Revision) Displays the hardware revision of the ATLAS Quad
USSI Module. This is a read-only field.
Online
The module is enabled, and is responding to the System
Controller’s status polls. This is the normal response of the
system.
No Response
The module is enabled, but is not responding to the System
Controller’s status polls. This response indicates either a
problem in the system or that the module is not installed.
Empty
The System Controller has not detected the presence of a
module in the slot, nor has a module been manually en-
abled for this option slot.
Offline
The module is installed, but has been taken Offline by a us-
er. The module is still responding to controller polls.
Offline/
No Response
The module is installed, but has been taken Offline by a us-
er. The module is not responding to polls.
Not Supported
The module is not supported by the current ATLAS Base
Unit.