User manual

Chapter 3. Operation
61200261L1-1 ATLAS Quad USSI Module User Manual 3-3
Figure 3-2. Modules Menu
MENU DESCRIPTIONS
>
SLT
Read security: 5
Displays the number of available slots in the ATLAS chassis. Slot 0 refers to
the ATLAS Base Unit. This field is read-only.
>
TYPE
Write security: 3; Read security: 5
Displays the type of module actually installed in the slot or the type of
module you plan to install in the slot. If an ATLAS Quad USSI Module is
installed, the
Type
field automatically defaults to USSI (the ATLAS Quad
USSI Module). You can use this field to preconfigure a system before actu-
ally installing modules by simply specifying the module that you want to
install in each slot.
To help you follow the terminal menu hierarchy, the following notations are used.
>
MAIN MENUS
» Submenus
»» Sub-submenus
If you install a module in a slot, then want to install a different type
of module in the slot, you must set this field to
Empty
before
selecting another module type.
If a module is installed,
Type
automatically displays the name of
the installed module, and cannot be set to any other option.