User manual

Chapter 3. Operation
3-2 ATLAS Quad USSI Module User Manual 61200261L1-1
Figure 3-1. Menu Tree
The ATLAS System Controller automatically detects the presence of the AT-
LAS Quad USSI Module when it is installed in the system. To see the menus
for the ATLAS Quad USSI Module via the terminal menu, use the arrow
keys to scroll to the
Modules
menu and press
Enter
to access the module
choices (see Figure 3-2). The following sections describe all of these menu
options.
Refer to the ATLAS 800 User Manual for detailed instructions on
how to navigate through the terminal menu.
Quad USSI Info Part Number
Serial Number
SLIP
Quad USSI
Alarms
PLL
ZERO
NO EXT CLK
Slt DTE Status Name
Type Data Rate Clk (+/–)
Menu Inband Stats Data
Modules Alarms PLL / Fifo CTS
Test Configuration DCD
State DSR
Status DTR
Rev 0 Inh
Inband
Send Leads
Loopbk
Loopback Status
Test 511
511 Result
Inject
511 Clr
DTE Interface DTE Interface Mode
Current DTE Type