Installation guide

NetVanta 6355 PoE Hardware Installation Guide Unit Installation

Installing a CompactFlash Card

The CompactFlash (CF) slot supports only the ADTRAN-provided 1 GB CompactFlash card. Follow

these instructions when installing a card.

Figure 17. CompactFlash Card Installation

Your NetVanta unit is now ready to be configured and connected to the network. For information on

configuration for a specific application, refer to the configuration guides provided online on the ADTRAN’s

Knowledge Base at http://kb.adtran.com

. For details on the CLI, refer to the AOS Command Reference Guide

(ADTRAN’s Knowledge Base article 2219). All other related documents are also available online on the

ADTRAN’s Knowledge Base at http://kb.adtran.com

The CompactFlash card is hot-swappable and can be inserted or removed while power is

applied to the unit.

Instructions for Installing a CompactFlash Card

Step Action

1 Remove the two screws and the cover from the CF slot on the rear of the unit.

2 Slide the module into the CF slot until the card is firmly seated against the chassis.

3 Replace the CF slot cover.

4 The CompactFlash options will now be available in the GUI and the AOS CLI.

Com

pactFlash