Installation guide

ManualsBrandsADTRAN ManualsComputer equipment6355PoE

NetVanta 6355 PoE Hardware Installation Guide Option Modules

NetVanta E1/PRI VIM (P/N 1200696G1)

The NetVanta E1/PRI VIM (see Figure 10) adds E1 voice capability to the NetVanta. See

Table 6-5 on page 43 for the E1 connector pinouts. An optional DIM is required for dial backup

applications. Dial backup is not supported at this time.

Figure 10. NetVanta E1/PRI VIM

Features and Specifications

Operating Modes

• Primary Rate ISDN (PRI), CAS

E1 Interface

• Supported Standards: ITU-T G.703,

ITU-T G.704 (CRC-4), ITU-T G.732,

ITU-T G.823

• Line Rate: 2.048 Mbps +

50 bps

• Line Code: AMI or HDB3

• Framing: TS-16, CRC-4, double frame

• FE1 Line Rate: Channelized timeslot

(multiples of 64 kbps)

• Receiver Sensitivity: -36 dB

• Connector: RJ-48C

Clock Source

•Line

•Internal

•System

Diagnostics

• Test Pattern Generation and Detection:

QRSS, 511, all ones, all zeros

• Network loopbacks

• Alarm generation detection

• Network and user sets of performance data

(15 minutes and 24 hours)

Compliance

• EMC - see Electromagnetic Compatibility

(EMC) Table on page 6.

• AS/ACIF S016

• ETSI TBR 12/TBR 13

• EN 60950-1

• IEC 60950-1

• AS/NZS 60950-1

• RoHS compliant (Telecommunications

exemption)

Environmental

• Operating Temperature: 0°C to 50°C

• Storage Temperature: -20°C to 70°C

• Relative Humidity: Up to 95 percent,

noncondensing

Physical

• Dimensions: 2.75-inch W x 4.25-inch D