Installation guide

ManualsBrandsADTRAN ManualsComputer equipment6355PoE

Option Modules NetVanta 6355 PoE Hardware Installation Guide

Voice Interface Modules

NetVanta T1/PRI VIM (P/N 1200695L1)

The NetVanta T1/PRI VIM (see Figure 9) adds T1 voice capability to the NetVanta. See Table 6-5 on page 43

for the T1 connector pinouts. An optional DIM is required for dial backup applications. Dial backup is not

supported at this time.

Figure 9. NetVanta T1/PRI VIM

Features and Specifications

Operating Modes

• Primary Rate ISDN (PRI), CAS

T1 Interface

• Supported Standards: AT&T TR 62411,

AT&T TR 54016, Bellcore TR 194,

ANSI T1.403

• Line Rate: 1.544 Mbps +

75 bps

•Line Code: AMI or B8ZS

• Framing: D4 (SF) or ESF

• FT1 Line Rate: DS0 channelized

(multiples of 64 kbps)

• Input Signal: 0 to -36 dB (DS1)

• Line Build-Out: 0, -7.5, -15, -22.5 dB

(long), 0 to 655 ft (short)

• DS0 Assignment: Programmable

• Connector: RJ-48C

Clock Source

•Line

•Internal

•System

Diagnostics

• Test Pattern Generation and Detection:

QRSS, 2

- 1, all ones, all zeros

• Network loopbacks (local and remote);

responds to both inband and FDL loop

codes

• Alarm generation detection

• Network performance data (15 minutes

and 24 hours)

Compliance

• EMC - see Electromagnetic Compatibility

(EMC) Table on page 6.

• ACTA/FCC Part 68

• IC CS-03

• UL/CUL 60950

Environmental

• Operating Temperature: 0°C to 50°C

• Storage Temperature: -20°C to 70°C

• Relative Humidity: Up to 95 percent,

noncondensing

Physical

• Dimensions: 2.75-inch W x 4.25-inch D