Installation guide

ManualsBrandsADTRAN ManualsComputer equipment6355PoE

NetVanta 6355 PoE Hardware Installation Guide Option Modules

NetVanta ADSL NIM, Annex A (P/N 1202869E1)

The NetVanta ADSL, Annex A NIM (see Figure 8) adds ADSL capability to the NetVanta. The module

provides a single ADSL, ADSL2, or ADSL2+ network interface to support rates up to 25 Mbps. See Table 6-8

on page 43 for the pinouts. An optional DIM is required for dial backup applications. Dial backup is not

supported at this time.

Figure 8. NetVanta ADSL NIM, Annex A

WAN-ADSL DBU

Features and Specifications

DSL Interface

• ADSL over POTS, Annex A

• Supported Standards:

– ITU-T G.992.1 Annex A (G.dmt)

– ITU-T G.992.2 Annex A (G.lite)

– ITU-T G.992.3 Annex A ADSL2

(G.dmt.bis)

– ITU-T G.992.5 Annex A ADSL2+

– ITU-T G.992.3 Annex L READSL2

– ANSI T1.413 Issue 2

• Connector: RJ-1C (6-pin jack, inner pair)

ATM

• Multiple Protocol over AAL5

(RFC 2684)

• PPP over ATM (RFC 2364)

• PPP over Ethernet (RFC 2516)

• ATM Forum UNI 3.1/4.0 PVC

• ATM class of service (UBR)

• ATM F5 OAM

• Up to 16 virtual circuits

Compliance

• EMC - see Electromagnetic

Compatibility (EMC) Table on page 6.

• ACTA/FCC Part 68

• AS/ACIF S043

• AS/ACIF S002

• IC CS-03

• EN 60950

• IEC 60950

• UL/CUL 60950

• AS/NZS 60950

• RoHS compliant (Telecommunications

exemption)

Environmental

• Operating Temperature: 0°C to 50°C

• Storage Temperature: -20°C to 70°C

• Relative Humidity: Up to 95 percent,

noncondensing

Physical

• Dimensions: 2.75-inch W x 4.25-inch D