Installation guide

ManualsBrandsADTRAN ManualsComputer equipment6355PoE

Option Modules NetVanta 6355 PoE Hardware Installation Guide

NetVanta E1/FE1 + G.703 NIM (P/N 1200878E1)

The NetVanta E1/FE1 + G.703 NIM (shown in Figure 7) provides a single WAN-E1 interface

(2.043 Mbps) with user-selectable TS0 assignment and a G.703 drop port that can be used to drop and

insert traffic to an E1 PBX. See Table A-6 on page 43 for the WAN-E1 pinouts. See Table A-8 on page 43

for the G.703 pinouts. An optional DIM is required for dial backup applications. Dial backup is not supported at

this time

Figure 7. NetVanta E1/FE1 + G.703 NIM

WAN-E1 G.703 DBU

Features and Specifications

Operating Modes

• Frame Relay, multilink Frame Relay

• PPP, MLPPP

• HDLC

WAN-E1 Interface

• Supported Standards: ITU G.703,

ITU-T G.704 (CRC-4), ITU-T G.823,

ITU-T G.797

• Line Rate: 2.048 Mbps +

50 PPM

• Line Code: AMI or HDB3

• Framing: FAS with optional CRC-4

• FE1 Line Rate: Channelized timeslot (in

multiples of 64 kbps)

• Receiver Sensitivity: -30 dB

• Connector: RJ-48C

G.703 Interface

• Receiver Sensitivity: -30 dB

• Line Rate: 2.048 Mbps +

50 PPM

• Line Code: AMI or HDB3

• Framing: FAS with optional CRC-4

• Capacity: 1 to 31 timeslots

• Connector: RJ-48C

Clock Source

•Network

•Internal

• Through

Diagnostics

• Test Pattern Generation and Detection:

QRSS, 511, all ones, all zeros

• Network loopbacks

• Network performance data (15 minutes

and 24 hours)

• Alarm generation and detection

Compliance

• EMC - see Electromagnetic

Compatibility (EMC) Table on page 6.

• AS/ACIF S016

• ETSI TBR 12/TBR 13

• EN 60950

• IEC 60950

• AS/NZS 60950

• RoHS compliant (1200878E1 only)

(Telecommunications exemption)

Environmental

• Operating Temperature: 0°C to 50°C

• Storage Temperature: -20°C to 70°C

• Relative Humidity: Up to 95 percent,

noncondensing

Physical

• Dimensions: 2.75-inch W x 4.25-inch D