Installation guide

Physical Description NetVanta 6355 PoE Hardware Installation Guide

During power outages, the FXS interfaces are connected directly to the FXO interfaces. This feature is

called life line mode, and allows customers to make analog calls even when the power is out.

MOH

Reserved for future use.

Page

Reserved for future use.

10/100Base-T Ethernet Interface

The Ethernet port (ETH 0/0) is an RJ-45 connector. The Ethernet port provides the following:

• 10Base-T or 100Base-T with a single connector

• Autonegotiation

• CSMA/CD

• IEEE 802.3 compatibility

Door Relay

Reserved for future use.

CONSOLE Interface

The CONSOLE interface is an EIA-232 serial port (DCE), which provides for local management and

configuration (via a DB-9 female connector).

Power Connection

The rear panel has a power input to the AC universal power supply. Please refer to Supplying Power to

the Unit on page 36 for connection details.

For the NetVanta 6355 PoE, devices connected to the FXS (ANALOG STA) ports must

be ACTA/FCC Part 68 compliant due to the direct connection to the public switched

telephone network (PSTN) in life line mode.

Connection directly to an external modem requires a cross-over cable.