Installation guide

Physical Description NetVanta 6355 PoE Hardware Installation Guide

• Class of service (CoS) (802.1p) and DiffServ for traffic prioritization with weighted round robin (WRR)

and strict priority queuing

• Four queues per egress port

• DiffServ-to-802.1p mapping

• Spanning Tree/Rapid Spanning Tree support (802.1D/802.1w)

• Storm control, link aggregation (802.3ad), and port mirroring

• MAC-based port security

• Full-featured onboard IP access router supports all NetVanta 3000 Series routing features

• Interchangeable network interface modules (NIMs): T1/FT1, T1/FT1 + DSX-1, Dual T1, and ADSL

Annex A available

• Interchangeable voice interface modules (VIMs): Quad FXS, Quad FXO, Dual FXS/FXO, E1/PRI, and

T1/PRI available

• Standards-based BGP, OSPF, RIP, and static routing support

• Bridging across the WAN

• Ideal for Frame Relay, Multilink Frame Relay, PPP, Multilink PPP (MLPPP), PPPoE, or ATM (ADSL

NIM) networks

• Integral stateful inspection firewall protects against denial of service (DoS) attacks

• Quality of service (QoS) with low latency queuing (LLQ) and weighted fair queuing (WFQ), and

DiffServ marking

• Frame Relay and PPP fragmentation to avoid latency

• VLAN (802.1Q) trunking/interVLAN routing and bridging

• Network address translation (NAT/NAPT) and NAT Traversal version 2

• NAT-compatible SIP ALG

• DHCP client, server, and relay

• IPsec VPN upgrade supporting 500 tunnels and DES/3DES/AES encryption

• Single combination 10/100/1000Base-T Ethernet port/SFP module slot for high-speed uplink or

stacking requirements

• 6.8 Gbps nonblocking switching capacity

• 1U, 19-inch rackmount metal enclosure

• 1.7-inch H x 17.2-inch W x 7.8-inch D

• Auto-ranging power (100 to 250 VAC, 50/60 Hz)

• Operating temperature: 0°C to 50°C

Power Over Ethernet

The NetVanta 6355 PoE interfaces provide the ability to detect attached powered devices (PDs) and deliver

48 VDC to the PD via existing CAT 5 cabling. The PoE interfaces are fully compliant with the IEEE 802.3af

PoE standard. By default, the PoE ports automatically discover and provide power to IEEE-compliant PDs.