System information

960 Stewart Drive Sunnyvale, CA 94085 USA Phone [phone] +1.877.80SHORE Fax [phone] www.ShoreTel.com
- 33 -
We then click into “EtherSpeak” from the VPN Peers main screen and enter the VPN connection
information including IKE information, IPSEC information and information regarding the two hosts that
will connect the networks together to permit encrypted SIP communications.
There are two main configuration components with establishing an IPSEC tunnel between two
endpoints over the Internet. The first is IKE settings and the second is IPSEC settings. They are also
commonly referred to as “Phase 1 settings” and “Phase 2 settings”.
For the IKE Settings – you will need to provide information that will be supplied by EtherSpeak. For this
example, we have illustrated some settings.
Initiate Mode: MAIN
Respond Mode: MAIN
NAT Traversal: Allow both V1 and allow V2
Peer Address: 4.28.51.x (ask EtherSpeak for correct connection info)
Remote ID: Optional
Preshared Key: Is a unique passphrase that will be issued by EtherSpeak. For this illustration we
entered “password”
Local ID: Optional