System information

960 Stewart Drive Sunnyvale, CA 94085 USA Phone [phone] +1.877.80SHORE Fax [phone] www.ShoreTel.com
- 24 -
The “Trunk ID:” will be auto assigned, but in general will be “T01”, the “Type:” should be “SIP”, if it is not
“SIP then you added the “Trunk Group” incorrectly, be sure to add the “Type” as “SIP” above. Define a
“Trunk Name:” this can be anything you choose, we set the name as “EtherSpeak_SureTrunk”.
Scroll down to SIP Settings tab and add the IP of 172.26.1.90. This IP will be accessed over a VPN.
1. Set “SIP Server Address:” parameter to “IP” and define the IP address given to you by
EtherSpeak - add the IP of 172.26.1.90.
2. Set “SIP Server Port:” parameter to “5060”.
3. Set the “Dial String Source:” parameter to “Request URI”.
No other parameters require adjustment, leave them at default settings. Scroll to the
bottom of the “SIP Registrar Settings”:
4. Set the “Codec Group:” parameter to “711_729 (G.711 uLaw, G729)”.
No other parameter modifications are necessary in this area.
5. Click on the “Apply” radio button. This action will change the page to the main “Trunk
Accounts” and you will get the message “SIP Trunk updated successfully”.
We will now add the “ISDN” trunk account: