System information

960 Stewart Drive Sunnyvale, CA 94085 USA Phone [phone] +1.877.80SHORE Fax [phone] www.ShoreTel.com
- 20 -
Set the time to the appropriate time, or use a known good NTP server in your geography. You will get
the message “Settings applied successfully”.
Eth 0/2 Interface Configuration
We will now configure the external / WAN Ethernet interface, this will be the interface that EtherSpeak
will send calls to. You will need to navigate to the “Configuration for “Ethernet 0/2”” page, you can do so
either from the “System Summary” page, where you will need to scroll to the bottom of the page
(Ethernet Summary) and click on the interface name “eth 0/2”. Or from the “Physical Interfaces” page,
click on the interface name of “eth 0/2”, both of these pages are available under the “System” pull down
menu on the left hand side of the Adtran Web UI.
The “Configuration for “Eth 0/2”” page will look as follows: