Specifications

Total Access 600 Series System Manual Section 4.2 T1 TDM UIG

L2 PROTOCOL (T1[0] - FRE) > STATUS > PORT > TX BYTES

Total bytes transmitted out the WAN port

L2 PROTOCOL (T1[0] - FRE) > STATUS > PORT > RX BYTES

Total bytes received on the WAN port

L2 PROTOCOL (T1[0] - FRE) > STATUS > PORT > FULL STATUS TX FRAMES

Number of full status frames transmitted out the WAN port.

L2 PROTOCOL (T1[0] - FRE) > STATUS > PORT > FULL STATUS RX FRAMES

Number of full status frames received on the WAN port.

L2 PROTOCOL (T1[0] - FRE) > STATUS > PORT > LINK INTEGRITY STATUS TX FRAMES

Number of Link-Integrity (LI) only Frames transmitted out the WAN port.

L2 PROTOCOL (T1[0] - FRE) > STATUS > PORT > LINK INTEGRITY STATUS RX FRAMES

Number of LI only Frames received on the WAN port.

L2 PROTOCOL (T1[0] - FRE) > STATUS > PORT > DROP UNKNOWN DLCI

Number of frames received that were not associated with any known PVC.

L2 PROTOCOL (T1[0] - FRE) > STATUS > PORT > DROP INVALID DLCI

Number of frames received that had illegal DLCIs.

L2 PROTOCOL (T1[0] - FRE) > STATUS > PORT > CLEAR STATS

Selecting this activator will clear the port Frame Relay Statistics.

L2 PROTOCOL (T1[0] - FRE) > STATUS > PVC'S

View the Frame Relay status on a per PVC basis.

L2 PROTOCOL (T1[0] - FRE) > STATUS > PVC'S > DLCI

The DCLI number identifies the virtual circuit being monitored.