Specifications

Section 6 ADTRAN Utilities Total Access 600 Series System Manual
416 © 2002 ADTRAN, Inc. 61200624L1-1A
Connect
Opens dialog box for setting HOST NAME and
P
ORT parameters for a Telnet session. Also lets
you E
DIT ENTRY, ADD NEW entry, and DELETE
stored entries. When the parameters are set, click
C
ONNECT to make the connection. Click CANCEL
to end the session.
Host Name
Accepts and stores host names. You may either enter a name, an IP address, or a domain name
directly from this field. Click on the drop-down arrow to display a complete list of previously stored
host names.
Port
Provides several port options. You may enter port numbers directly into this field to connect to
non-standard ports or select the drop-down combo-box to display the following options:
Edit Entry
Changes either the unit name or the IP address of each
host. Press either
Tab, Return, or a period (.) after each
number in the IP address to move to the next field. If you
press
Return or (.) while the cursor is located in each IP
field, that field entry is deleted.
Add New
Prompts you for the same information as the EDIT ENTRY
dialog box for new host. When enabled, the U
SE DNS (Domain Name Server) feature allows users
to request D
OMAIN LOOK UP via a DNS server on the network, rather than specifying an IP address.
The name then appears in the H
OST NAME field.
Delete
Removes a host name from the list; simply select the host name you want to remove, and, at the
prompt, click D
ELETE.
Connect
Establishes the Telnet session.
Disconnect
Terminates the Telnet session.
To re-establish the session, select C
ONNECT from SESSION MENU or press ENTER three times. This
action restores the previous connection.
TELNET establishes a Telnet session
E
CHO provides a loopback for troubleshooting
D
ISCARD bit bucket; discards data
D
AYTIME returns the time
C
HARGEN displays as a unique character stream; used for self-tests