Specifications

SAVING AND LOADING TEXT CONFIGURATION USING THE TERMINAL

COMMAND LINE

Introduction

The unit has the ability to download a text file, which contains the configuration of the entire unit. This

configuration may then be altered in a text editor, and then uploaded to the unit.

This DLP will explain how to save and load the configuration.

Prerequisite Procedures

You must connect to the unit with a VT100 terminal session (reference DLP-001 and DLP-002) or via a

Telnet session (reference DLP-006, Telnetting to the Unit).

Tools and Materials Required

• Access to a PC or other computer connected to the LAN (Telnet access only)

• VT100 compatible terminal or computer with terminal emulation software

• Appropriate cable to connect terminal to the unit (customer-provided)

• DB-9 female to RJ-45 female adapter (customer-provided) for connecting to the

CRAFT port on the rear

of the unit. This adapter is ADTRAN-proprietary.

• Ethernet cable from the

10/100BASET port on the unit to a hub (customer-provided)

• Use Ethernet crossover if going from the unit to a PC (customer-provided).

To prevent electrical shock, do not install equipment in a wet location or during a

lightning storm.

In this DLP, unit refers to the Total Access 604, 608, 612, 616, and 624.