Specifications

Total Access 600 Series System Manual Section 4.7 FXS UIG

4. OPERATION

Provisioning, status, and testing of the FXS ports are performed via the MODULES screen menus and a VT

100 terminal. The VOICE LED on the front panel provides quick status.

LED Status

After the initialization sequence, the VOICE LED provides collective status of the analog service.

Methods of Operation

You can control and configure the FXS from the terminal menus, allowing detailed configuration, status,

and diagnostic. The remainder of this section describes the menu items presented when managing the Total

Access 600 via the terminal menu.

Access the terminal menu using either a VT 100 terminal attached to the Total Access 600’s CRAFT port

or a Telnet session established through the unit’s Ethernet port.

The factory default is no password.

Terminal Menu Structure

The Total Access 600 uses a hierarchical menu structure to provide access to all of its features. The

top-most menu level leads to submenus which are grouped by functionality. All menu items display in the

terminal window. To access the FXS, activate the M

ODULES menu.

From the M

ODULES menu, select the FXS menu, and then press Enter to access the features of the FXS

ports.

Red Voice Gateway or Network connection prevents

analog service.

Green Analog service is available.

Flashing Off Hook (Busy)