Specifications

Section 2 Engineering Guidelines Total Access 600 Series System Manual

Craft Port

The CRAFT port connects to a computer or modem. The CRAFT port input provides the following

functions:

• Accepts input from a PC or a modem for controlling the unit.

• Operates at 300, 1200, 2400, 4800, 9600, 19200, 38400, 57600, and 115200 bps.

• Acts as input for either VT 100 or PC control.

• Acts as an interface for flash memory software downloads using XMODEM.

The

CRAFT connection follows, and Table 10 shows the pinout.

Connector type RJ-48C

Table 10. CRAFT Pinout

PIN NAME DESCRIPTION

1 GND Ground - connected to unit chassis

2 RTS Request to send - flow control

3 RXDATA Data received by the unit.

4 DTR Data terminal ready

5 TXDATA Data transmitted by the unit.

6 CD Carrier detect

7 UNUSED —

8 CTS Clear to send - flow control