Manualshelf

Specifications

ManualsBrandsADTRAN ManualsConsumer electronics624
321322323324325326327328329330
Total Access 600 Series System Manual Section 4.6 SHDSL ATM UIG
61200624L1-1A © 2002 ADTRAN, Inc. 321
>Ethernet
Use the ETHERNET menu (Figure 11) to configure the Ethernet port on the Total Access 600.
Figure 11. Ethernet Menu
IP
This is used to set up the IP addresses for the LAN on the Total Access 600.
IP Address
The IP address assigned to the Total Access 600's Ethernet port is set here. This address must be unique
within the network.
Subnet Mask
This is the IP network mask that is to be applied to the Total Access 600's Ethernet port.
Default Gateway
The default gateway is used by the Total Access 600 to send IP packets whose destination address is not
found in the route table.
No - only when TCP not established
Ignore - ignore TCP flags