Specifications

Section 4.6 SHDSL ATM UIG Total Access 600 Series System Manual
320 © 2002 ADTRAN, Inc. 61200624L1-1A
SRC MASK
Bits which are used in the source comparison.
(dotted decimal format)
IP DEST
IP address compared to the destination address.
(dotted decimal format)
DEST MASK
Bits which are used in the destination
comparison. (dotted decimal format)
SRC PORT
IP source port number used for comparison
Range: 0 to 65535. (decimal format)
SRC PORT
C
MPR
Type of comparison that is performed.
= means ports equal to
not = means port not equal to
> means port greater than
< means port less than
None - means the source port is not compared
DST PORT
IP destination port number used for comparison
Range: 0 to 65535. (decimal format)
DST PORT
CMPR
Type of comparison that is performed
= means ports equal to
not = means port not equal to
> means port greater than
< means port less than
None - means the destination port is not
compared
PROTO
Protocol used for comparison. Range: 0 to 255.
(decimal format)
PROTO CMPR
Type of comparison that is performed
= means protocols equal to
not =
means protocols not equal to
> means protocols greater than
<
means protocols less than
None means the protocol is not compared
TCP EST
Ye s - only when TCP established