Specifications

Section 4.6 SHDSL ATM UIG Total Access 600 Series System Manual
306 © 2002 ADTRAN, Inc. 61200624L1-1A
System Config
Set up the Total Access 600 operational configuration from the SYSTEM CONFIG menu. Figure 4 shows the
items included in this menu.
Figure 4. System Configuration Menu
>Network Timing Mode
Selects the timing source for the entire system. Network is the only timing option available.
Network
The system’s clock is recovered from the network (WAN interface).
>Telnet Access
Sets Telnet access to
ON or OFF.
>Telnet User List
Up to four users can be configured for access to the Total Access 600. Each user can be assigned a security
level and time out.
Name
A text string of the user name for this session.
Authen Method
The user can be authenticated in two ways:
Password
When the authenticating method is PASSWORD, this text string is used for the password.
Idle Time (1-255)
This sets the amount of time you can be idle before you are automatically logged off.
PASSWORD
The Password field is used to authenticate the user.
RADIUS
The Radius client is used for authenticating the user.