Specifications

Section 4.5 SDSL ATM UIG Total Access 600 Series System Manual
280 © 2002 ADTRAN, Inc. 61200624L1-1A
Max Failure
Due to the nature of PPP, configuration options may not be agreed upon between two PPP peers. This
value is the number of configuration-naks that should occur before an option is configuration-rejected.
This allows a connection to succeed that might otherwise fail. The possible values are 5 (def), 10, 15
and 20.
Encapsulation
This is the PPP encapsulation. (LLC or VC-Mux)
Filters
The Total Access 600 can block packets in and out of a WAN port by use of the filters. They are set up
in two steps: 1) define the types of packets that would be of interest in the
CONFIGURATION/GLO-
BAL/SECURITY/FILTER DEFINES menu, and 2) set up the filter type and combination of defines that will
cause a packet block.
WAN-TO-LAN (In)
The packets which come into the Total Access 600 can be filtered in three ways:
In Exceptions
This is a list of up to 32 filter entries which can be combined using the operations field. The operations
are performed in the order they appear on the list.
DISABLED (def)
Turns off packet input filtering. No
incoming packets are blocked.
BLOCK ALL
All incoming packets from the WAN are
blocked except as defined in the
FILTERS/IN
EXCEPTIONS list.
FORWARD ALL
All incoming packets from the WAN are
not blocked except as defined in the
FILTERS/IN EXCEPTIONS list.
ACTIVE
Turns this entry active when set to ON.
TYPE
Selects the filter define list to reference:
MAC
from the CONFIGURATION/GLOBAL/SECURITY/FIL-
TER DEFINES/MAC FILTER DEFINES list.
PATTERN
from the CONFIGURATION/GLOBAL/SECURITY/FIL-
TER DEFINES/PATTERN FILTER DEFINES list.
IP
from the CONFIGURATION/GLOBAL/SECURITY/FIL-
TER DEFINES/IP FILTER DEFINES list.
IPX
from the CONFIGURATION/GLOBAL/SECURITY/FILTER
D
EFINES/IPX FILTER DEFINES list.
FILTER LIST NAME
Selects between filters defined in the list.
NEXT OPER
The next operation to use to combine with
the next filter in the list: