Specifications

Total Access 600 Series System Manual Section 4.5 SDSL ATM UIG
61200624L1-1A © 2002 ADTRAN, Inc. 275
>WAN
Use the WAN menu (Figure 12) to configure WAN settings on the Total Access 600.
Figure 12. WAN Menu
L2 Protocol
Displays the current L2 protocol - ATM (Read Only).
ATM
Use the ATM menu to setup Data PVCs for the router.
Description
This is the text description for the PVC.
VPI
ATM virtual port identifier.
VCI
This is the ATM virtual channel identifier.
PCR
Peak Cell Rate. Limits transmitted cells.
QOS
Quality of Service. Indicates this PVC’s traffic class.
Protocol
This is the protocol supported on the PVC.
RFC1483 IP
Use this selection to support IP on this PVC. (These settings only take effect when RFC1483 is the
selected protocol.)
Active
This selection enables IP on this PVC.
Far - End IP Address
This is the address of the NEXT hop router on this interface.